Bảng chú giải

Chọn một trong các từ khóa ở bên trái…

WRITINGDạng bài: Cách viết Diagram

Thời gian đọc: ~110 min

PROCESS - QUÁ TRÌNH (1)

Sơ lược về dạng bài Process

Process là gì?

Là một dạng bài trong Task 1 của phần thi IELTS Writing. Đây được xem là một trong những dạng biểu đồ khó nhất.

Là dạng bài biểu thị một thứ gì đó hình thành hoặc được tạo ra.

Quá trình thường bao gồm các bước hoặc từng giai đoạn.

Một trong những điểm đặc trưng nhất của dạng bài Process là sự về từ vựng. Mỗi một Process sẽ yêu cầu một nhóm từ vựng riêng biệt.

Những khái niệm cụ thể, quan trọng và ‘lạ’ sẽ được ưu tiên ghi vào biểu đồ.

Yêu cầu chung
  • Dạng bài Process yêu cầu thí sinh mô tả một quá trình hoặc quy trình nào đó theo biểu đồ hay hình vẽ cho trước.

  • Cần nêu đầy đủ các bước/ giai đoạn của quá trình. Sau đó phải nêu ra đâu là bước bắt đầu và đâu là kết thúc.

VD: There are three main steps including …

  • Phải đề cập đến những thay đổi quan trọng trong quá trình.

  • Sử dụng ‘ngôn ngữ mô tả trình tự” khi làm bài.

VD: at the first / second / following / final stage of the process, next, after that, then, finally,...

  • Nên sử dụng câu khi miêu tả quá trình.

VD: ‘At the final stage, the product is delivered to shops’ (because we don't need to know who delivered the product).

  • Khi đọc process, cần chú ý và khoanh tròn các động từ hoặc những key words có thể biến đổi thành các dạng khác nhau của động từ

VD: Có thể biến đổi động từ thành dạng bị động, hoặc danh từ.

  • Không nên thể hiện quan điểm cá nhân trong bài Task 1.

Phân loại Process

dạng chính:

  ➢ Natural Process - Quá trình Tự nhiên

  ➢ Man-made Process - Quy trình Nhân tạo

Natural Process (Quá trình Tự nhiên)

Là quá trình xảy ra ngoài tự nhiên, tự bản thân phát triển, sự tác động và can thiệp của con người.

VD: vòng đời của cá, vòng tuần hoàn của nước,…

Sử dụng thì đơn và thể chủ động để mô tả quá trình tự nhiên.

Man-made process (Manufacturing process) - Quy trình Nhân tạo

Là quá trình sản xuất nhân tạo, sự tham gia của con người, máy móc. VD: quy trình sản xuất gạo, quy trình làm chocolate,…

Sử dụng thì hiện tại đơn và thể bị động khi mô tả

Chiến lược làm bài Process

Bố cục

Phần mở đầu (Introduction)

- Viết bằng cách paraphrase lại câu của đề bài

- Có thể sử dụng cấu trúc sau:

 + The chart/diagram (shows/describes/illustrates) how + clause

 + The production of …

 + The process of producing/ making …

 + How … is produced/ made.

 + How to produce/ make …

VD: The diagram shows how fresh apple is canned

Xu hướng chung (Overview)

- Chỉ ra có bao nhiêu trong process

- Giới thiệu ngắn gọn bước bắt đầu và kết thúc của process

- Nếu đề cho 2 bức tranh cho bài process thì coi như đó là dạng mixed, mỗi body thân bài dành để mô tả cho bức tranh

- Có thể sử dụng cấu trúc sau:

 + There are … main stages (steps) in the process/in the process of producing … ,beginning with … and ending with …

 + The … involves … main steps/ stages beginning with … and finishing with …

 + This flow chart provides an overview of …

VD: There are five main steps in the process of producing milk, meanwhile only three stages are required to store it after that.

   In general, the process includes a series of stages like a natural circle/ a life cycle of …, but involves … main steps which begins with … and finishes with …

Thân bài (Body)

- 2 đoạn thân bài mô tả chi tiết từng bước của process.

 + Body 1: Từ bước đầu đến giữa quá trình

 + Body 2: Từ giai đoạn giữa đến cuối.

PROCESS - QUÁ TRÌNH (2)

Dạng bài Natural Process (Quá trình Tự nhiên)

Bước 1: Phân tích đề

Process này là kiểu linear (tuyến tính, theo đường thẳng) hay cyclical (tuần hoàn)?

Process này có bao nhiêu bước?

Bắt đầu từ đâu? Kết thúc ở đâu?

Process nói về gì: Salmon Life Cycle – vòng đời của cá hồi

Xác định điểm bắt đầu và trình tự các giai đoạn của Process: là một bao gồm giai đoạn chính đã được đánh số 1-3.

- Một chu kỳ khép kín thì không có một điểm bắt đầu cụ thể nào, nhưng chúng ta có thể dựa vào cách đánh số trong sơ đồ để xác định trình tự miêu tả các giai đoạn cơ bản:

 + Giai đoạn 1: Trứng cá hồi (ở thượng nguồn – river) nở thành cá con (fry) và ‘fry’ sẽ sống ở hạ nguồn (lower river)

 + Giai đoạn 2: Cá con tăng kích thước (được gọi là smolt) và bơi ra biển. Ở đây chúng tiếp tục quá trình trưởng thành.

 + Giai đoạn 3: Những con ‘smolt’ trở thành ‘ salmon’. ‘Adult salmon’ bơi trở về nơi chúng được sinh ra, và chu kỳ lại tiếp diễn.

- Paraphrase lại những đối tượng xuất hiện trong sơ đồ của cá hồi

 + upper/lower river → upper/lower reaches of a river, upstream/downstream river

 + small stones → pebbles

 + fry → baby salmon

 + adult salmon → mature salmon

 + open sea → ocean

Bước 2: Viết Introduction

- Paraphrase lại đề bài

The process
diagram
drawing
• illustrate
• describe
• demonstrate
• the life cycle of salmon from eggs to adult fishes.
• how salmon grow from eggs to mature individuals.
• the main stages which take place in the life cycle of salmon.

 → “The diagram describes how salmon grow from eggs to mature individuals.”

Bước 3: Viết Overview

- Tìm điểm nổi bật của quá trình để đưa vào miêu tả trong đoạn Overview.

- Có nhiều cách tiếp cận khác nhau

 • Chỉ ra số lượng các cùng với điểm bắt đầu/kết thúc của quá trình cần miêu tả.

VD: “Overall, there are three main stages in the life cycle of salmon starting with salmon eggs in the upper river”

 • Chu kỳ đó kéo dài trong bao lâu

VD: “In general, the complete life cycle lasts for approximately 10 years.”

 • Chỉ ra sự giữa các giai đoạn

VD: “In summary, each of the three stages in the development of the salmon takes place in a different aquatic location.”

 • Chia ra các nhóm giai đoạn

VD: “Overall, it can be seen that the first two stages of the salmon’s life cycle occur in freshwater environment while the third stage takes place in saltwater.”

Bước 4: Lựa chọn thông tin để đưa vào 2 đoạn Detail

- Xác định điểm bắt đầu của Process rồi sau đó diễn tả theo thứ tự, từ giai đoạn đầu tới giai đoạn .

- Có nhiều cách tiếp cận khác nhau, nhưng trong ví dụ này tác giả sẽ chia phần thân bài ra đoạn chính.

→ Body 1: Miêu tả quá trình phát triển của cá hồi trong môi trường nước ngọt (‘fry’ và ‘smolt’)

 + Cá hồi thường đẻ trứng ở khúc thượng nguồn (upper river) nơi nước chảy chậm (slow flowing).

 + Trứng được bảo vệ bởi rặng cây lau (reeds) và các viên sỏi nhỏ (small stones) trong khoảng 5-6 tháng trước khi nở.

 + Những con cá hồi mới nở được gọi là ‘fry’ và chúng có kích thước rất bé, khoảng 3-8 .

→ Salmon begins life as eggs in the slow-moving upper reaches of a river. Eggs are surrounded by reeds and pebbles for about five to six months before they hatch. The newborn fish normally called “fry” are very small, which are only three to eight centimeters long.

 + ‘fry’ sau đó xuôi theo dòng sông tới hạ nguồn (lower river). Chúng sống ở đây trong khoảng 4 cho tới khi đạt kích thước 12-15 cm. Những con cá lớn này được gọi là ‘smolt’.

→ The fry follows the fast flow to the lower river. They stay there for 4 years until they reach the length of twelve to fifteen centimeters. Grown fish are known as ‘smolt’.

→ Body 2: Tập trung vào giai đoạn cá hồi sống ở nước mặn (‘adult salmon’). Phân tích xem trước khi bơi ra biển lớn, cá hồi phát triển như thế nào:

 + Ở giai đoạn tiếp theo của vòng đời, cá hồi bơi ra biển và hoàn thành quá trình trưởng thành

 + Những con ‘smolt’ di cư ra biển và sống ở đó trong 5 năm. Sau 5 năm chúng tăng kích thước lên thành 70-76 cm – kích thước của cá hồi trưởng thành.

 + Cuối cùng, cá hồi bơi trở về nơi nó được sinh ra, và chu kỳ lại bắt đầu.

→ The ‘smolt’ migrate to the open sea and live there for about 5 years. After 5 years, these ‘smolt’ will have grown to adult size, which is about 70-76 centimeters. Their reproductive stage then begins as the mature salmon swims back to their birthplace and lays eggs. The salmon’s life cycle starts again at the same place where it begins.

Mẫu hoàn chỉnh

The diagram describes how salmon grow from eggs to mature individuals.

Overall, there are three main stages in the life cycle of salmon starting with salmon eggs in the upper river and the complete cycle lasts for about 10 years.

Firstly, salmon begins life as eggs in the slow-moving upper reaches of a river, surrounded by reeds and pebbles. This shelter usually keeps the eggs safe for about five to six months before they hatch. The newborn fish normally called “fry” are very small, which are only three to eight centimeters long. The fry then follow the fast flow to the lower river and stay there for 4 years until they reach the length of twelve to fifteen centimeters. These grown fish are known as “smolt”.

At the next stage of the life cycle, the ‘smolt’ migrate to the open sea. After approximately 5 years living in the ocean, these ‘smolt’ will have grown to adult size, which is about 70-76 centimeters. Their reproductive stage then begins as the mature salmon swims back to their birthplace and lays eggs. The salmon’s life cycle starts again at the same place where it begins.

(192 words)

PROCESS - QUÁ TRÌNH (3)

Dạng bài Man-made Process (Quy trình Nhân tạo)

Bước 1: Phân tích đề

Process này là kiểu linear (tuyến tính, theo đường thẳng) hay cyclical (tuần hoàn)?

Process này có bao nhiêu bước?

Bắt đầu từ đâu? Kết thúc ở đâu?

Process nói về gì: How geothermal is used to produce electricity - Cách điện được tạo ra từ năng lượng địa nhiệt

The diagram below shows how geothermal energy is used to produce electricity.

Xác định số lượng các giai đoạn và trình tự sắp xếp của các giai đoạn đó. Có thể nhận ra các giai đoạn qua cách đánh số:

 + Giai đoạn 1: Nước lạnh được trữ ở trong 1 bể chứa và được bơm xuống đất vào một cái giếng bơm (injection )

 + Giai đoạn 2: Nước lạnh từ giếng bơm được truyền qua khu địa nhiệt (geothermal zone), được đun nóng và dẫn vào một ‘giếng sản xuất’ (production well).

 + Giai đoạn 3: Nước nóng từ ‘production well’ được bơm lên trên mặt đất vào một buồng ngưng tụ ().

 + Giai đoạn 4: Hơi nước được tạo thành trong buồng ngưng tụ, và được dẫn vào trong một buồng khác.

 + Giai đoạn 5: Hơi nước làm quay tua-bin (turbine) và qua đó tạo ra năng lượng kích hoạt máy kích điện (generator).

Bước 2: Viết Introduction:

Paraphrase đề bài
The process
diagram
• drawing
• illustrate
• describe
• demonstrate
• the production of electricity using geothermal energy
• how electricity is generated by using geothermal energy
• the process by which geothermal energy is converted into electricity.

→ “The diagram illustrates the process by which geothermal energy is converted into electricity.”

Bước 3: Viết Overview:

Có nhiều cách viết khác nhau:

  • Chỉ ra số lượng các giai đoạn cùng với điểm bắt đầu/kết thúc của quá trình cần miêu tả.

VD: “Overall, it can be seen that there are five main stages of the process, starting from storing cold water in a tank”

  • Chỉ ra nơi diễn ra các giai đoạn

VD: In general, it can be seen that there are five main stages of the process and these stages take place both under and above the ground level.

  • Chỉ ra nguyên liệu chính của quá trình – một cách đặc biệt hữu dụng với Manufacturing Process

VD: In summary, the process involves five main stages and the main material used is water.

  • Phân biệt các giai đoạn

VD: Overall, it can be seen that while the second and third stage of the process take place underground, the remaining stages occur above the ground level.

Bước 4: Lựa chọn thông tin để đưa vào 2 đoạn Body

Chia phần thân bài ra đoạn chính.

 ⇾ Body 1: Miêu tả 3 giai đoạn (1), (2) và (3) (nước được bơm trong lòng đất)

 + Quá trình tạo ra điện từ năng lượng địa nhiệt bắt đầu bằng việc trữ nước lạnh trong một bồn chứa.

 + Nước lạnh được bơm xuống dưới lòng đất, qua một cái ống lớn dài 4.5 , vào một giếng bơm.

 + Nước tiếp tục chảy qua khu địa nhiệt, nơi đá nóng được sử dụng để tăng nhiệt độ của nước.

  → The process of generating electricity using geothermal energy starts by storing cold water in a tank. The cold water is pumped down under the ground through a large pipe (4.5 kilometers) into an injection well. It keeps flowing through the geothermal zone, where hot rocks are used to raise the temperature.

 ⇾ Body 2: Tập trung vào các giai đoạn (4) và (5) (khi nước được bơm lên trên)

 + Nước đã đun nóng được bơm từ well’ lên một buồng ngưng tụ lớn. Nước nóng được chuyển thành hơi nước.

 + Hơi nước đóng vai trò xoay và tiếp năng lượng cho tua-bin.

 + Máy kích điện lại được kích hoạt bởi tua-bin và tạo ra điện.

  → Heated water is pumped up from the production well into a large condenser. Hot water is transformed into steam. The steam serves a function of powering and rotating a turbine. A generator is powered by this turbine and produces electricity.

   Mẫu hoàn chỉnh

The diagram illustrates the process by which geothermal energy is converted into electricity.

In general, it can be seen that there are five main stages of the process and these stages take place both under and above the ground level.

The process of generating electricity using geothermal energy starts by storing cold water in a tank. The cold water is then pumped down under the ground through a large pipe, which measures 4.5 kilometers in length, into an injection well. Once cold water reaches the injection well, it keeps flowing through the geothermal zone, where hot rocks are used to raise the temperature.

At the following stage of the process, heated water is pumped up from the production well into a large condenser, where hot water is transformed into steam. Next, the steam serves a function of powering and rotating a turbine. A generator is then powered by this turbine and subsequently produces electricity. Finally, generated electricity is sent to the electricity tower.

(164 words)

PROCESS - QUÁ TRÌNH (4)

Từ vựng và cấu trúc sử dụng khi làm dạng bài Process

Ngôn ngữ mô tả trình tự

- Sử dụng thành thạo các Sequencing languages – ngôn ngữ mô tả trình tự là cực kỳ quan trọng.

- Khả năng vận dụng tốt các công cụ này sẽ có tác dụng lớn trong việc cải thiện không chỉ tiêu chí và Cohesion (Liên kết và Mạch Lạc) mà còn cả tiêu chí Lexical Resources (Đa dạng nguồn từ vựng)

- Sequencing Languages sử dụng với dạng Process được chia thành 2 loại chủ yếu:

 + Mô tả mối quan hệ Trước – Sau

 + Mô tả mối quan hệ xảy ra đồng thời

Mô tả mối quan hệ Trước – Sau

First(ly) – Then – Next -....- Final(ly)

VD: At the first stage of the paper-recycling process, recycled paper is collected.

Then, some water is added and the mixture is left for an hour.

(...)

Finally, the new paper is left to dry in a warm place for at least 24 hours.

After/Before

VD: Some water is added and the mixture is soaked for an hour. After that, the mixture is beaten for about 45 seconds until a pulp is formed.

After being soaked for an hour, the mixture is beaten for about 45 seconds until a pulp is formed.

Before being beaten for about 45 seconds to form a pulp, the mixture is left for an hour. The mixture is beaten for about 45 seconds and a pulp is formed afterwards.

  • Lưu ý: afterwards (adv) chỉ được dùng ở cuối câu và có nghĩa tương tự ‘after that’.

Following/Followed by

VD: The mixture is beaten for about 45 seconds and a pulp is formed afterwards. At the following stage, the pulp is poured into a shallow tray and some water is also added. It is then mixed by hand.

At the following stage, the pulp is poured into a shallow tray and some water is also added.

This is followed by a hand-mixing process.

  • Lưu ý: ‘followed by’ chỉ được sử dụng cùng một danh từ ở sau. Cần cẩn thận khi sử dụng

Once

VD: The mixture is beaten for about 45 seconds and a pulp is formed afterwards. Once it is ready, the pulp is poured into a shallow tray.

Subsequent/Subsequently

VD: The mixture is soaked for an hour. Subsequently, the mixture is beaten for about 45 seconds until a pulp is formed.

The mixture is soaked for an hour and is subsequently beaten for about 45 seconds until a pulp is formed.

At the subsequent stage of the process, the mixture is soaked for an hour.

‘Having + Verb participle’

VD: Having mixed the pulp by hand, he uses a rolling pin to flatten the pulp. (chủ động)

Having been poured into a shallow tray with some water, the pulp is then mixed by hand. (bị động)

Mô tả mối quan hệ xảy ra đồng thời

During

VD: During its entire life cycle, salmon have lived in both freshwater and saltwater.

Thereby

VD: The rolling pin is used to flatten the pulp, thereby forcing out any excessive water.

While/at the same time:

VD: While the mixture of sand and soda is being heated, some other chemicals are added to create various colors.

The mixture of sand and soda is heated. At the same time, some other chemicals are added to create various colors.

Sand and soda are mixed and heated at the same time.

Một số cấu trúc và từ vựng thường dùng trong Process

Cấu trúc và từ vựng cho phần mở bài

 + X (shows/describes/illustrates) how + clause

VD: The diagram below shows how salt is removed from sea water to make it drinkable

 + X (shows/describe/illustrates) + noun

VD: The charts below show the result of public survey

 + X (provides/gives) information about……….

VD: The diagrams provides information about the salmon’s life cycle

Overview

 - Nếu có 2 bức tranh chỉ 2 process thì cần giới thiệu mỗi process có bao nhiêu bước, viết trong 1 câu, dùng các từ nối như meanwhile/ while/…

VD: There are five main steps in the process of producing milk, meanwhile only three stages are required to store it after that.

 - Nếu là natural process và như một vòng tuần hoàn

VD: In general, the process includes a series of stages like a natural circle (vòng tuần hoàn tự nhiên)/ a life cycle of …. (vòng đời của … ), but involves … .main steps which begins with … and finishes with …

Thân bài

 - Một số động từ hữu dụng

 + Change from … into

 + Bring from … to

 + Move from … to

 + Transform into

 + Give birth to

 + Appear/ disappear

 + Pipe from … To

 + Become

 - Một số danh từ hữu dụng

 + The transformation of something into

 + The conversion of something into

 + The replacement of something into

 + The disappearance of something into

 + The appearance/ emergence of/ birth of

 + The support of

 + The birth of

 + The removal of

 + The elimination of

 + The combination/ mixture of

Đa dạng hóa cấu trúc mô tả ở từng bước

* Lưu ý: Chủ ngữ (S) là những nguyên vật liệu, sản phẩm trong Process

The process begins / continues/ ends with đối tượng + being + VpII + by + thiết bị/ máy móc

VD: The process begins with waste paper being collected. (Quy trình bắt đầu bằng việc những giấy thải được thu thập.)

The process continues with olives being washed by a rinsing machine. (Quy trình tiếp tục với việc dùng máy rửa làm sạch những trái olive.)

S + be sent to + thiết bị + in which they/ it + to be + VpII

Hoặc

S + be transported to + nơi chốn + in which they/ it + to be + VpII

VD: Glass pieces are sent to a furnace in which they are melted. (Những mảnh vỡ thủy tinh được gửi đến một lò nấu thủy tinh nơi mà tại đó chúng được nung chảy.)

Plastic waste is transported to a factory in which it is treated with chemicals. (Rác thải plastic được vận chuyển đến một nhà máy mà ở đó nó được xử lý bằng hóa chất.)

* Các cấu trúc phân nhánh:

While S1 + to be + VpII , S2 + to be + VpII

VD: While bottles are transported to a cleaning factory, other kinds of waste are buried in landfills. (Trong khi những cái chai được vận chuyển đến một nhà máy làm sạch, các loại rác thải khác được chôn ở bãi rác.)

S1 + to be + VpII, S2 + being + VpII

VD: Olives are smashed into olive paste, with olive stones being taken away. (Những trái ô liu được nghiền thành bột nhão, với những hạt ô liu được lấy đi.)

Từ vựng và cấu trúc khác có thể dùng trong dạng Process

 + to obtain sth by doing sth: thu được cái gì nhờ vào

 + to break up sth into sth: đập thành mảnh vụn

 + to be mixed with: được trộn với

 + to filter sth: lọc

 + to be either put in a mould or cut by a wire cutter: hoặc được đưa vào 1 cái khuôn hoặc được cắt bởi 1 cái máy cắt gạch

 + to be laid in a drying oven: được đặt vào 1 cái lò nung

 + to store sth in sth: cất, dự trữ

 + to add sth to sth: thêm cái gì vào cái gì

 + to be then heated in a kiln: được đun nóng trong 1 cái buồng

 + to heat (sth): đốt bằng cách nung

 + to be cooled: được làm nguội

 + to be packaged: được đóng gói

 + to package sth in sth: đóng gói trong kiện

 + to be transported to…/ to be delivered to …: được vận chuyển đi đâu đó

 + to be picked by hand: được hái bằng tay

 + to be dried in the sun: được phơi khô dưới ánh nắng mặt trời

 + to be sold to …: được bán cho …

 + to be harvested: được thu hoạch

 + to pipe sth to sth (v) dẫn bằng đường ống

 + to drive sth: vận hành

 + to remove sth from sth: loại bỏ cái gì ra khỏi cái gì

1. How the Australian Bureau of Meteorology collects up-to-the-minute information on the weather

  • The diagram below shows how the Australian Bureau of Meteorology collects up-to-the-minute information on the weather in order to produce reliable forecasts.

  • Write a report for a university lecturer describing the information shown below.

    figure: img(lightbox src="/content/643ca719181d5bce01857afb/images/1.png")

Model answer:

The figure illustrates the process used by the Australian Bureau of Meteorology to the weather.

There are four stages in the process, beginning with the collection of information about the weather. This information is then , prepared for presentation, and finally broadcast to the public.

at the first and second stages of the process, there are three ways of collecting weather data and three ways of analysing it. Firstly, information can be received by satellite and presented for analysis as a satellite photo. The same data can also be passed to a radar station and presented on a radar screen or synoptic chart. Secondly, incoming information may be collected by radar and analysed on a radar screen or synoptic chart. , drifting buoys also receive data which can be shown on a synoptic chart.

At the third stage of the process, the weather broadcast is prepared on computers. Finally, it is to the public on television, on the radio, or as a recorded telephone announcement.

(170 words, band 8.0)

Các từ đồng nghĩa và các cấu trúc/ từ vựng nổi bật:

  • produce reliable forecasts = forecast the weather
  • broadcast (v): phát tin tức bằng cách truyền thanh/truyền hình
  • satellite (n): vệ tinh
  • present (v): trình bày
  • synoptic chart (n): biểu đồ khái quát
  • drifting buoy (n): phao nổi

2. The process of recycling glass bottles

  • The diagram below shows the process of recycling glass bottles.

  • Write at least 150 words.

    figure: img(lightbox src="/content/643ca719181d5bce01857afb/images/2.png")

Model answer:

The diagram illustrates how glass bottles are recycled.

Overall, it is clear that there are three separate stages in the recycling process, starting with the collection of wasted bottles and with new products entering the market to be purchased.

In the initial stage, all glass bottles are stored in collection points from where they are picked up and by trucks to a cleaning plant. Here, the bottles are washed with high pressure water, and then sorted according to color (clear, green or brown) and prepared for the following stages.

The clean and sorted bottles are then to a recycling plant, where they are melted in a special glass furnace to turn the glass into liquid form. The recycled liquid glass, with new liquid glass, is then molded to new glass bottles. Finally, the new bottles are ready to be used and sent to supermarkets where they will be purchased and used by customers, thereby the process.

(163 words, band 8.0)

Các từ đồng nghĩa và các cấu trúc/ từ vựng nổi bật:

  • recycling glass bottles = how glass bottles are recycled
  • high pressure water (n): nước áp lực cao
  • sort (v): phân loại
  • plant (n): thiết bị, máy móc
  • plant (n): nhà máy, xí nghiệp
  • furnace (n): lò nung chảy

3. The process of waste paper recycling

  • The chart below shows the process of waste paper recycling.

  • Write at least 150 words.

    figure: img(lightbox src="/content/643ca719181d5bce01857afb/images/3.jpg")

Model answer:

The flow chart shows how waste paper is recycled.

It is clear that there are six distinct stages in this process, from the collection of waste paper to the eventual production of usable paper.

At the first stage in the paper recycling process, paper is collected either from paper banks, where members of the public leave their used paper, or directly businesses. This paper is then sorted by hand and separated according to its grade, with any paper that is not suitable for recycling being . Next, the graded paper is transported to a paper mill.

Stages four and five of the process both involve cleaning. The paper is cleaned and pulped, and objects such as staples are taken out. Following this, all remnants of ink and glue are removed from the paper the de-inking stage. Finally, the pulp can be processed in a paper making machine, which makes the end product: paper.

(160 words, band 9.0)

Các từ đồng nghĩa và các cấu trúc/ từ vựng nổi bật:

  • the process of waste paper recycling = how waste paper is recycled
  • manufacture (v) = produce
  • sort (v) = grade
  • paper mill: xưởng làm giấy
  • pulp (v): nghiền nhão ra
  • pulp (n): bột giấy
  • staple (v): ghim dập sách
  • remnant (n): tàn dư

4. The recycling process of plastics

  • The diagram below shows the recycling process of plastics.

  • Summarize the information by describing the main features of the chart and making comparisons where appropriate.

    figure: img(lightbox src="/content/643ca719181d5bce01857afb/images/4.jpg")

Model answer:

The given diagram illustrates the process of plastic recycling.

Overall, there are essentially six stages in the plastic recycling process, beginning with the buying, using and of new plastic products and ending with recycled products entering the market again.

In the first stage, new products in shops are purchased, used and thrown away. Plastic bags, along with other garbage, are sent and buried in landfill sites. Plastic bottles and containers , are collected for recycling. After being gathered, the plastic bottles are then taken to sorting houses where they are divided into different categories.

Once the plastic has been sorted, it is then loaded trucks and transported to factories where it is processed and made into new plastic products. These new, recycled plastic products are then finally back to retail shops where they are sold, reused and discarded once again, continuing the process.

(149 words, band 8.0)

Các từ đồng nghĩa và các cấu trúc/ từ vựng nổi bật:

  • the recycling process of plastics = the process of plastic recycling
  • discard (v): loại, vứt bỏ
  • display (v): trưng bày, phô bày
  • bury (v): chôn, che đi
  • landfill site (v): bãi chôn lấp
  • drive (v) = transport
  • retail shop (n): cửa hàng bán lẻ

5. The water cycle

  • The diagram below shows the water cycle, which is the continuous movement of water on, above and below the surface of the Earth.

  • Write at least 150 words.

    figure: img(lightbox src="/content/643ca719181d5bce01857afb/images/5.png")

Model answer:

The picture illustrates the way in which water passes from ocean to air to land during the natural process known as the water cycle. Three main stages are shown on the diagram. Ocean water evaporates, falls as rain, and runs back into the oceans again.

at the evaporation stage, we can see that 80% of water vapour in the air comes from the oceans. Heat from the sun water to evaporate, and water vapour to form clouds. At the second stage, labelled “precipitation” on the diagram, water falls as rain or snow.

At the third stage in the cycle, rainwater may take various . Some of it may fall into lakes or return to the oceans via “surface runoff”. , rainwater may filter through the ground, reaching the layer of the earth. Salt water intrusion is shown to take place just before groundwater passes into the oceans to complete the cycle.

(156 words, band 9.0)

Các từ đồng nghĩa và các cấu trúc/ từ vựng nổi bật:

  • above and below the surface of the Earth = from ocean to air to land
  • evaporate (v): bốc hơi
  • water vapour (n): hơi nước
  • condense to(v): cô đọng, ngưng tụ lại
  • label (v): dán nhãn
  • precipitation (n): sự ngưng đọng, kết tủa thành nước
  • way = road = path
  • surface runoff (n): dòng chảy trên bề mặt
  • filter through (v): ngấm qua
  • impervious = impermeable (adj): không thể ngấm qua được
  • salt water intrusion (n): sự xâm nhập mặn
  • ground water (n): nước ngầm

Ôn luyện